[Novalug] LVM Help
Brander Snaxe
brandon20va@yahoo.com
Mon Oct 29 14:22:58 EDT 2012
Can the X-RAID be attached as a single block device to a Linux laptop or server?
----- Original Message -----
From: Roger W. Broseus <rogerb@bronord.com>
To: NOVALUG <novalug@calypso.tux.org>
Cc:
Sent: Sunday, October 28, 2012 12:58 PM
Subject: [Novalug] LVM Help
Trying to recover data from LVM.
A friend's server (ReadyNAS NV+) suffered a power failure. He had four disks
setup in x-raid array. His data appeared to be gone. We mounted the disks in a
dock and took a look at them, trying to mount them according to a HowTo
(http://tinyurl.com/6bezctt). We physically mounted the drives in an external
doc with a USB connector.
One of the disks does appear to be dead - we see nothing under Linux after
powering it up. Others show a small partition with some "stuff" on it - small
files/folders, e.g., with names like /bin, /etc. A swap partition and two
others: PV sdd5, VG c, 370 GB; and PV sdd6 VG c 559 GB. Also three unknown
device c. Formats (fmt) are lvm2.
Following the referenced guide above,we saw on ONE of the larger partitionson
one of the drives and were able to recover data. No luck with the other drives.
Any suggestions?
--
--
Roger W. Broseus - Linux User
Email: RogerB@bronord.com
Web Site: www.bronord.com
Updated summer 2012 – pics from travels
_______________________________________________
Novalug mailing list
Novalug@calypso.tux.org
http://calypso.tux.org/mailman/listinfo/novalug
More information about the Novalug
mailing list